Nougat Updates Hitting Galaxy S7 and S7 edge in Australia

Posted on   by
The Android 7.0.1 Nougat updates Galaxy S7 and S7 edge has continued its rolling out across the globe. First it was rolled out in UK alone, then followed within the rest of the European countries. Last few days ago US carrier such as T-Mobile and AT&T has responded the call, this time around it's for all Australian Galaxy S7 and S7 edge owners turn to receive the same Android Nougat treatment.

Yes, the Nougat update will also start hitting the Galaxy S7 and S7 edge in Australia this time around. These updates will  hit at the same time for the factory unlocked version, and the carrier devices such as Optus, Telstra and Vodafone.  Thought the original release schedule is February 21st , but something causes some delays but an official announcement from Samsung addresses that it could start on February 24, 2017.

Now, for the Nougat updates firmware version here are the build details for each device that you should keep an eye.

Australia's Unlocked Galaxy S7 and S7 edge Android Nougat Updates


Galaxy  S7  Galaxy S7 edge

  • Android version: 7.0
  • Baseband version: G930FXXU1DQB1
  • Kernel version: 3.18.14-10422490
  • Build number: NRD90M.G930FXXU1DQB5
  • Android security patch level: 1 February 2017
  • AP: G930FXXU1DQB9
  • CP: G930FXXU1DQB1
  • CSC: G930FXSA1DQB5


  • Android version: 7.0
  • Baseband version: G935FXXU1DQB1
  • Kernel version: 3.18.14-10422490
  • Build number: NRD90M.G935FXXU1DQB5
  • Android security patch level: 1 February 2017
  • AP: G935FXXU1DQB9
  • CP: G935FXXU1DQB1
  • CSC: G935FXSA1DQB5


Optus Galaxy S7 and S7 edge Android Nougat Updates


Galaxy  S7  Galaxy S7 edge

  • Android version: 7.0
  • Baseband version: G930FXXU1DQB3
  • Kernel version: 3.18.14-10422490
  • Build number: NRD90M.G930FXXU1DQBD
  • Android security patch level: 1 February 2017
  • AP: G930FXXU1DQBD
  • CP: G930FXXU1DQB3
  • CSC: G930FOPS1DQB9


  • Android version: 7.0
  • Baseband version: G935FXXU1DQB3
  • Kernel version: 3.18.14-10422490
  • Build number: NRD90M.G935FXXU1DQBD
  • Android security patch level: 1 February 2017
  • AP: G935FXXU1DQBD
  • CP: G935FXXU1DQB3
  • CSC: G935FOPS1DQB9


Vodafone Galaxy S7 and S7 edge Android Nougat Updates


Galaxy  S7  Galaxy S7 edge

  • Android version: 7.0
  • Baseband version: G930FXXU1DQB1
  • Kernel version: 3.18.14-10422490
  • Build number: NRD90M.G930FXXU1DQB9
  • Android security patch level: 1 February 2017
  • AP: G930FXXU1DQB9
  • CP: G930FXXU1DQB1
  • CSC: G930FVAU1DQB9


  • Android version: 7.0
  • Baseband version: G935FXXU1DQB1
  • Kernel version: 3.18.14-10422490
  • Build number: NRD90M.G935FXXU1DQB9
  • Android security patch level: 1 February 2017
  • AP: G935FXXU1DQB9
  • CP: G935FXXU1DQB1
  • CSC: G935FVAU1DQB9


Telstra Galaxy S7 and S7 edge Android Nougat Updates


However, for Telstra's Galaxy S7 and S7 edge build version has not revealed yet. But it will be available on or before the 24th of February.

Speaking of Android Nougat, it brings a bunch of new features and general system enhancements. These updates also includes the most recent  Android security patches dated as February 1, 2017.

How to Update a Galaxy S7 or a Galaxy S7 edge via Over-The-Air (OTA)


  • Ensure your battery is fully charged before starting the software update. This is a must and very important part to get rid of some issues if ever the software update being interrupted due to a power failure.

  1. From the Home screen, tap the Menu Key > Settings > About device > Software updates > Check for Updates.
  2. If your device finds a new software update, tap Download now. When complete, a screen will appear advising you that the new version of software is ready to be installed. Tap Install update.
  3. The device will power down and power back on. A screen will appear stating that the installation has been completed. Tap OK.

How to Update Galaxy S7  and S7 edge Using Smart Switch for PC


The second method is a firmware update through Samsung Smart Switch for PC. You may head over to Samsung support page so you can download the Smart Switch, and then install it in your PC or Mac computer. Once you installed the Smart Switch, all you need is connect your Galaxy S7  into your PC using the USB data cable, then simply run and follow Smart Switch on-screen’s software update instruction.
  1. Connect the cable to a compatible USB port on your computer.
  2. Connect the other end of the cable to your mobile device.
  3. Allow your computer to install any required drivers for your device. This process may take a few minutes.
  4. Open Smart Switch on your computer, and allow it to make the connection.
  5. If a software update is available for your device, Smart Switch will automatically prompt you to update. At any time, you can click Update.
  6. Click Update to begin downloading the necessary files.
  7. Click OK to proceed.Your device may turn off and on a few times during the update process. Once complete the device will return to the Home screen.