G930FXXS1APG3 Galaxy S7 Android 6.0.1 Marshmallow SM-G930F

Galaxy S7 SM-G930F Firmware version G930FXXS1APG3 Android 6.0.1 Marshmallow
DeviceGalaxy S7 SM-G930F
Android version6.0.1 (Marshmallow OS)
Android security patch level1 July 2016
Baseband versionG930FXXU1APEQ
Kernel version3.18.14-8252943
Build numberMMB29K.G930FXXS1APG3
Build dateMon 04 Jul 2016

You can view the firmware info in the device settings. From Home screen > Apps > Settings > About device.

Download Firmware Build G930FXXS1APG3

Region Stock Firmware
Europe – XEU (Unlocked version) 

How to Use a Stock Firmware?

Read the Full Detailed Instructions: How to Install a Stock Firmware on a Galaxy S7 or a S7 Edge 

This stock firmware can only be use on  Samsung Galaxy S7 SM-G930F only. It can be use either to manually update the device, unroot and restore it back to its original Android OS state, and if the device has been modified in unauthorized way and no longer receives OTA updates.

Flashing Instructions

  1. Connect the phone to PC using the USB data cable.
  2. Reboot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  3. Extract and run Odin3 multi-flasher .
  4. Extract the firmware package.
  5. Grab Odin3 Multi-flasher and install the phone’s USB driver.
  6. Backup all important data stored in the phone’s memory, such as contact, messages, music, videos, pictures, documents, and more.
  7. Recharge the phone or it should have at-least 50% remaining power.
  8. Load the firmware file:
    • Multiple packed – load each file in Odin3’s designated slots, such as AP,  BL, CP,  and CSC button.
    • Single file – 
    load in the AP button
  9. Make sure the Odin’s Re-partition option is NOT ticked.
  10. Click the Start button, wait for a couple minutes until the installation finishes.

You may also perform the factory data reset to obtain a fresher and cleaner firmware installation. Doing so after every new update is installed will get rid of lag issues.