G930FXXU1DQAS Galaxy S7 Edge SM-G930F Android 7.0 Nougat Stock Firmware

Galaxy S7 SM-G930F  Android 7.0 Nougat Firmware version G930FXXU1DQAS. This is the first Android 7.0 Nougat updates landed on Galaxy S7  in United Arab Emirates.
Device Galaxy S7 SM-G930F
Android version 7.0 (Nougat)
Android security patch level 1 January 2017
Baseband version G930FXXU1DQA3
Kernel version 3.18.31-10273029
Build number NRD90M.G930FXXU1DQAS
Build date Mon 16 Jan 2017
AP G930FXXU1DQAS
CP G930FXXU1DQA3
CSC G930FOJV1DQAV






You can view the firmware info in the device settings. From Home screen > Apps > Settings > About device.

Download Firmware Build G930FXXU1DQAS


Region  Stock Firmware
United Arab Emirates

How to Use a Stock Firmware?


Read the Full Detailed Instructions: How to Install a Stock Firmware on a Galaxy S7 or a S7 Edge 

This stock firmware can only be use on  Samsung Galaxy S7 SM-G930F only. It can be use either to manually update the device, unroot and restore it back to its original Android OS state, and if the device has been modified in unauthorized way and no longer receives OTA updates.

Flashing Instructions

  1. Connect the phone to PC using the USB data cable.
  2. Reboot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  3. Extract and run Odin3 multi-flasher .
  4. Extract the firmware package.
  5. Grab Odin3 Multi-flasher and install the phone’s USB driver.
  6. Backup all important data stored in the phone’s memory, such as contact, messages, music, videos, pictures, documents, and more.
  7. Recharge the phone or it should have at-least 50% remaining power.
  8. Load the firmware file:
    • Multiple packed – load each file in Odin3’s designated slots, such as AP,  BL, CP,  and CSC button.
    • Single file – 
    load in the AP button
  9. Make sure the Odin’s Re-partition option is NOT ticked.
  10. Click the Start button, wait for a couple minutes until the installation finishes.

You may also perform the factory data reset to obtain a fresher and cleaner firmware installation. Doing so after every new update is installed will get rid of lag issues.




Edit