G930FXXU1DQC1 Galaxy S7 Edge SM-G930F Android 7.0 Nougat Stock Firmware

Galaxy S7 SM-G930F Android 7.0 Nougat Firmware version G930FXXU1DQC1.

DeviceGalaxy S7 SM-G930F
Android version7.0 (Nougat)
Android security patch level1 February 2017
Baseband versionG935FXXU1DQB3
Kernel version3.18.31-10422490
Build numberNRD90M.G930FXXU1DQC1
Build dateMon 27 Feb 2017
APG930FXXU1DQC1
CPG930FXXU1DQB3
CSCG930FNEE1DQC1





You can view the firmware info in the device settings. From Home screen > Apps > Settings > About device.

Download Firmware Build G930FXXU1DQC1


Region Stock Firmware
Nordic Countries

How to Use a Stock Firmware?


Read the Full Detailed Instructions: How to Install a Stock Firmware on a Galaxy S7 or a S7 Edge 

This stock firmware can only be use on  Samsung Galaxy S7 SM-G930F only. It can be use either to manually update the device, unroot and restore it back to its original Android OS state, and if the device has been modified in unauthorized way and no longer receives OTA updates.

Flashing Instructions

  1. Connect the phone to PC using the USB data cable.
  2. Reboot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  3. Extract and run Odin3 multi-flasher .
  4. Extract the firmware package.
  5. Grab Odin3 Multi-flasher and install the phone’s USB driver.
  6. Backup all important data stored in the phone’s memory, such as contact, messages, music, videos, pictures, documents, and more.
  7. Recharge the phone or it should have at-least 50% remaining power.
  8. Load the firmware file:
    • Multiple packed – load each file in Odin3’s designated slots, such as AP,  BL, CP,  and CSC button.
    • Single file – 
    load in the AP button
  9. Make sure the Odin’s Re-partition option is NOT ticked.
  10. Click the Start button, wait for a couple minutes until the installation finishes.

You may also perform the factory data reset to obtain a fresher and cleaner firmware installation. Doing so after every new update is installed will get rid of lag issues.




Edit