G930FXXU1DQC4 Galaxy S7 Edge SM-G930F Android 7.0 Nougat Stock Firmware

Galaxy S7 SM-G930F Android 7.0 Nougat Firmware version G930FXXU1DQC4.

DeviceGalaxy S7 SM-G930F
Android version7.0 (Nougat)
Android security patch level1 February 2017
Baseband versionG930FXXU1DQC2
Kernel version3.18.31-10422490
Build numberNRD90M.G930FXXU1DQC4
Build dateFri 3 Mar 2017
APG930FXXU1DQC4
CPG930FXXU1DQC2
CSCG930FOXA1DQC1






You can view the firmware info in the device settings. From Home screen > Apps > Settings > About device.

Download Firmware Build G930FXXU1DQC4


Region Stock Firmware
Europe (factory unlocked)
United Kingdom
France
Switzerland
Norway (TEN)
United Arab Emirates
Turkey
Morroco
Iraq


Stock Firmware How To's?

This stock firmware can only be use on Samsung Galaxy S7 SM-G930F only. It can be use either to manually update the device, unroot and restore it back to its original Android OS state, and if the device has been modified in unauthorized way and no longer receives OTA updates.

Important Note: Always use the latest firmware updates as includes but not limited to, new or enhanced Apps and Features,  device stability, fixes and resolves known issues, additional improvements to the device performance such as camera, data connectivity, audio and video quality, and various system improvements.

You might also check for the latest firmware version here: Galaxy S7 SM-G930F (International) Stock Firmware

Flashing Instructions

Read the Full Detailed Instructions: How to Install a Stock Firmware on a Galaxy S7 or a S7 Edge 
  1. Connect the phone to PC using the USB data cable.
  2. Reboot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  3. Extract and run Odin3 multi-flasher .
  4. Extract the firmware package.
  5. Grab Odin3 Multi-flasher and install the phone’s USB driver.
  6. Backup all important data stored in the phone’s memory, such as contact, messages, music, videos, pictures, documents, and more.
  7. Recharge the phone or it should have at-least 50% remaining power.
  8. Load the firmware file:
    • Multiple packed – load each file in Odin3’s designated slots, such as AP,  BL, CP,  and CSC button.
    • Single file – 
    load in the AP button
  9. Make sure the Odin’s Re-partition option is NOT ticked.
  10. Click the Start button, wait for a couple minutes until the installation finishes.

You may also perform the factory data reset to obtain a fresher and cleaner firmware installation as it will get rid of any lag issues.





Edit