G930UUEU4BQH3 US Unlocked Galaxy S7 SM-G930U Android 7.0 Nougat Stock Firmware

US Unlocked Samsung Galaxy S7 SM-G930U firmware build G930UUEU4BQH3. This firmware is a Android 7.0 Nougat OS update and were officially released on August 27, 2017.

DeviceGalaxy S7 SM-G930U
Android version7.0  (Nougat)
Android security patch level2017-08-01
Baseband versionG930UUEU4BQH3
Kernel version3.18.31-12006196
Build numberNRD90M.G930UUEU4BQH3


Stock Firmware: G930UUEU4BQH3


You may only use the latest firmware update as includes but not limited to, new or enhanced Apps and Features,  device stability, fixes and resolves known issues, additional improvements to the device performance such as camera, data connectivity, audio and video quality, and various system improvements.

The US unlocked Galaxy S7 G930U uses and shares similar firmware build version, no matter of which carrier's SIM Card your device have been used to.

SIM-Card/Carrier BuildsStock Firmware Downloads
 USA (standard) XAA-G930UUEU4BQH3 (link)
 AT&T ATT-G930UUEU4BQH3 (link)
 T-MobileTMB-G930UUEU4BQH3 (link)
 SprintSPR-G930UUEU4BQH3(link)
 VerizonVZW-G930UUEU4BQH3(link)
 Boost MobileBST-G930UUEU4BQH3(link)
Virgin-MobileVMU-G930UUEU4BQH3(link)
 CricketAIO-G930UUEU4BQH3(link)
 TracFoneTFN-G930UUEU4BQH3(link)
 US CellularUSC-G930UUEU4BQH3(link)
 Bluegrass CellularLRA-G930UUEU4BQH3(link)



You might also check the latest firmware update here : US Unlocked Galaxy S7 SM-G930U Stock Firmware

Stock Firmware Usage


This Stock firmware can only be use on a US factory unlocked Galaxy S7  SM-G930U only.  It can be use either to manually upgrade, unroot, as well as to fix the phone if bricked (such as bootloop, stuck in Samsung logo splash screen).  This firmware can restore the Galaxy S7 G930U to its original Android operating system.  You may use it only if the device has been modified in unauthorized way and if the device no longer receives an OTA update.

Stock firmware were also a handy tool to fix if one have messed-up and ended up the device into a soft-bricked state, such as bootloop (the phone keeps on restarting all over and over again), or the phone just stuck in a Samsung logo.

Instructions :


Read the Full Detailed Instructions: How to Install a Stock Firmware on a Galaxy S7 or a S7 Edge 
  1. Connect the phone to PC using the USB data cable.
  2. Reboot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  3. Extract and run Odin3 multi-flasher .
  4. Extract the firmware package.
  5. Grab Odin3 Multi-flasher and install the phone’s USB driver.
  6. Backup all important data stored in the phone’s memory, such as contact, messages, music, videos, pictures, documents, and more.
  7. Recharge the phone or it should have at-least 50% remaining power.
  8. Load the firmware file:
    • Multiple packed – load each file in Odin3’s designated slots, such as AP,  BL, CP,  and CSC button.
    • Single file –
    load in the AP button
  9. Make sure the Odin's Re-partition option is NOT ticked.
  10. Click the Start button, wait for a couple minutes until the installation finishes.

You may also perform the factory data reset to obtain a fresher and cleaner firmware installation. Doing so after every new update is installed will get rid of lag issues.

Edit