G935FXXU1DQB3 Galaxy S7 Edge SM-G930F Android 7.0 Nougat Stock Firmware

Galaxy S7 edge SM-G935F Android 7.0 Nougat Firmware version G935FXXU1DQB3.

DeviceGalaxy S7 edge SM-G935F
Android version7.0 (Nougat)
Android security patch level1 January 2017
Baseband versionG935FXXU1DQB1
Kernel version3.18.31-10422490
Build numberNRD90M.G935FXXU1DQB3
Build dateMon 30 Jan 2017

You can view the firmware info in the device settings. From Home screen > Apps > Settings > About device.

Download Firmware Build G935FXXU1DQB3

Region Stock Firmware
United Kingdom

How to Use a Stock Firmware?

Read the Full Detailed Instructions: How to Install a Stock Firmware on a Galaxy S7 or a S7 Edge 

This stock firmware can only be use on Samsung Galaxy S7 Edge SM-G935F only. It can be use either to manually update the device, unroot and restore it back to its original Android OS state, and if the device has been modified in unauthorized way and no longer receives OTA updates.

Flashing Instructions

  1. Connect the phone to PC using the USB data cable.
  2. Reboot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  3. Extract and run Odin3 multi-flasher .
  4. Extract the firmware package.
  5. Grab Odin3 Multi-flasher and install the phone’s USB driver.
  6. Backup all important data stored in the phone’s memory, such as contact, messages, music, videos, pictures, documents, and more.
  7. Recharge the phone or it should have at-least 50% remaining power.
  8. Load the firmware file:
    • Multiple packed – load each file in Odin3’s designated slots, such as AP,  BL, CP, andCSC button.
    •  Single file – 
    load in the AP button
  9. Make sure the Odin’s Re-partition option is NOT ticked.
  10. Click the Start button, wait for a couple minutes until the installation finishes.

You may also perform the factory data reset to obtain a fresher and cleaner firmware installation. Doing so after every new update is installed, it avoids any lag issues.