G935W8VLU2BQB6 Canada Galaxy S7 edge SM-G935W8 Android 7.0 Nougat Stock Firmware

Canada's Galaxy S7 edge SM-G935W8 official Android 7.0 Nougat stock firmware release version G935W8VLU2BQB6.
Device Galaxy S7 edge SM-G935W8
Android version 7.0 (Nougat)
Android security patch level February 1, 2017
Baseband version G935W8VLU2BQB6
Kernel version 3.18.31-10780217
Build number NRD90M.G935W8VLU2BQB6
Build date Fri 24 Feb 2017

Firmware G935W8VLU2BQB6 Downloads:

Carrier Stock Firmware
Canada (Unlock version default) Link
Telus Link
Bell Link
Rogers Link
Wind/Freedom Link
Fido Link
Koodo Link
Videotron Link
Eastlink Link
Sasktel Link
Virgin-Mobile Link
MTS Link

Important Note: It is highly recommended to update the device to the latest firmware updates as it includes but not limited to, new or enhanced Apps and Features,  device stability, fixes and resolves known issues, additional improvements to the device performance such as camera, data connectivity, audio and video quality, and various system improvements.

You may check the newer firmware version here: Galaxy S7 Edge SM-G935W8 (Canada variant) Stock Firmware

Stock firmware can only be use to restore the Galaxy S7 Edge SM-G935W8 to its original Android OS state. It can be use only if and when the device has been modified in unauthorized way and no longer receives an OTA updates. It can unroot and fully restore it back to factory default settings.

Stock firmware were also a handy tool to fix if one have messed-up and ended up the device into a soft-bricked state, such as bootloop (the phone keeps on restarting all over and over again), or the phone just stuck in a Samsung logo splash screen.

Using a Stock firmware: How to Use Stock Firmware

Read the Full Guide: How to Restore Back Galaxy S7 and S7 Edge to Stock Firmware

Odin3 Flashing Procedures:

  • Recharge the phone or it should have at-least 50% remaining power.
  • Backup all important data stored in the phone's memory, such as contact, messages, music, videos, pictures, documents, and more.
  • Grab these tools:
    Odin3 Multi-flasher
    - Samsung smartphones USB driver.
  1. Extract the firmware package.
  2. Extract and run Odin3 multi-flasher .
  3. Reboot the phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  4. Connect the phone to PC and wait until the recognized the phone
  5. Load the firmware file:
    - Single file - load in the AP button
    - Multiple packed  - load each file in Odin3's designated slots, such as AP, BL, CP, and CSC button
  6. Make sure re-partition is NOT ticked.
  7. Click the Start button, wait for a couple minutes until the installation finishes.

You may also perform the factory data reset to obtain a fresher and cleaner firmware installation. Doing so after every new update is installed may avoid or get rid of any lag issues.